1802225
Adjustable Tri-Ball Hitch
1 3001724 1 Support Assembly, Adjustable Tri-Ball
2 3001727 1 Mount Weldment, Adjustable Tri-Ball
3 3020620 1 Hitch, Adjustable Chrome Tri-Ball
HP6253WC 1 Pin, 5/8" Hitch w/Cotter
4 1 Pin, 5/8" Hitch
5 1 Cotter, Hairpin
3001949 1 Hardware Kit, Adjustable Tri-Ball
6 3001919 3 Pin, Ring 5/8" x 3-1/8"
7 3001953 1 Pin, Assembly 1/4" Snapper
8 FCS050013100 1 Screw, HHC 1/2-13 x 1 Gr. 5 Zn.
ITEM NO. PART NO. QTY. DESCRIPTION
Bill of Materials
Ball Capacities:
1-7/8"........................ 6,000 lbs.
2"............................... 7,500 lbs.
2-5/16"..................... 10,000 lbs.
Assembly
1. Insert the solid, L-shaped support assembly
(item 1) into your 2" x 2" receiver hitch, and secure
with the 5/8" hitch pin and hairpin cotter supplied
(items 4 & 5). The short leg of the “L” can be ori-
ented in the upward or downward
position to achieve desired hitch height.
2. Assemble Tri-Ball Mount (item 2) to the sup-
port assembly using two 5/8" ring pins (item 6)
and two 1/4" snapper pins (item 7). The Tri-Ball
Mount can be mounted with the bolt hole on top
or bottom to achieve desired hitch height.
3. Assemble Adjustable Tri-Ball Hitch (item 3)
into the 2" x 2" tube on the Tri-Ball Mount, with
the desired ball size on top. Secure with a 5/8"
ring pin (item 6) and a 1/4" snapper pin (item 7).
4. Once the desired height is achieved, insert
the 1/2" bolt (item 8) into the tapped hole in the
Tri-Ball Mount. Tighten bolt to remove any slack
between the Tri-Ball support and mount.
Inspect hitch before each use. Replace any worn
or damaged parts. Always use safety chains
when towing.
WARNING: Do not exceed the rating of the lowest-
rated component in your towing package.
WARNING: Maintain adequate vertical (tongue)
load to properly control the trailer (generally 10%),
but do not exceed the above-rated capacities.
Installation Instructions
9049 Tyler Blvd. • Mentor, Ohio 44060
Phone (440) 974-8888 • Fax (440) 974-0165
Toll-Free Fax 800-841-8003 • buyersproducts.com
3021854 Rev A.
WARRANTY
Buyers Products Co. warrants all truck/trailer hardware manufac-
tured or distributed by it, to be free from defects in material and
workmanship for a period of one year from date of shipment. Parts
must be properly installed and used under normal conditions. Any
product which has been altered, including modification, misuse,
accident or lack of maintenance will not be considered under
warranty. Normal wear is excluded. The sole responsibility of
Buyers Products Co. under this warranty is limited to repairing or
replacing any part or parts which are returned, prepaid, and are
found to be defective by Buyers Products Co. Authorization from
Buyers Products Co. must be obtained before returning any part.
No charges for transportation or labor performed on Buyers’ prod-
ucts will be allowed under this warranty.
(2 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels