Buyers Toolbox Gasket Replacement Manuel d'utilisateur télécharger pdf

9049 Tyler Blvd. • Mentor, Ohio 44060

Phone (440) 974-8888 • Fax (440) 974-0165

Toll-Free Fax 800-841-8003 • buyersproducts.com

Installation Procedure

Toolbox Gasket Replacement

Bill of Materials

1 3004279 9' Gasket, .50 x .60 TB Door

2 3003145 5' Gasket, 1/8 x 60 TB Door Hinge

3 3003844 2 Gasket, Patch

3000340 1 Bag, Poly 13" x 15" x .004

3000165 1 Label, 1" x 3" Adhesive

3005945 1 Procedure, Install

ITEM PART NO. QTY. DESCRIPTION

3005945 Rev. A

Warranty

Buyers Products Co. warrants all truck/trailer hardware manufac-

tured or distributed by it, to be free from defects in material and

workmanship for a period of one year from date of shipment. Parts

must be properly installed and used under normal conditions. Any

product which has been altered, including modification, misuse,

accident or lack of maintenance will not be considered under

warranty. Normal wear is excluded. The sole responsibility of

Buyers Products Co. under this warranty is limited to repairing or

replacing any part or parts which are returned, prepaid, and are

found to be defective by Buyers Products Co. Authorization from

Buyers Products Co. must be obtained before returning any part.

No charges for transportation or labor performed on Buyers’ prod-

ucts will be allowed under this warranty.

Door Perimeter Gasket

1. Remove the original gasket material from around the

toolbox opening.

2. The new door perimeter gasket is not square. The

gasket measures .50 x .60 and the groove it will be

pressed into is .50 wide. Look carefully at the

material and know which side is wider.

3. Find the center of the gasket length and press the

wide dimension of the gasket (.60) into the gasket

groove (.50) beginning at the top center of the box and

working to each corner. Do not pull or stretch the gas-

ket, especially in the corners, since this makes it thin-

ner and may permit leaks. “Pack in” as much material

into the groove, as you can, especially in

the corners.

4. Tuck the material behind the lower edge of the door

and trim the excess material flush with the

bottom of the toolbox.

Door Hinge Gasket (1/8" thick x 1/2" wide)

1. Remove the original gasket material from

between the hinge halves at the bottom edge of

the toolbox door.

2. Remove the adhesive cover from the new

material and press it in place without stretching.

Door Corner Gaskets

1. Remove the original corner gaskets, remove the

adhesive covers from the new gaskets and press them

into place along 2 edges in the lower corners of

the door.

Quality since 1946

9049 Tyler Blvd. • Mentor, Ohio 44060

Phone (440) 974-8888 • Fax (440) 974-0165

Toll-Free Fax 800-841-8003 • buyersproducts.com

Installation Procedure 1

Résumé du contenu

Page 1 - Installation Procedure

9049 Tyler Blvd. • Mentor, Ohio 44060Phone (440) 974-8888 • Fax (440) 974-0165Toll-Free Fax 800-841-8003 • buyersproducts.comInstallation ProcedureToo

Commentaires sur ces manuels

Pas de commentaire

Buyers Toolbox Gasket Replacement Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Buyers Toolbox Gasket Replacement. Buyers Toolbox Gasket Replacement User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Buyers Toolbox Gasket Replacement